Muj oblibený.
Někdo. kdo by udělal návod, jak to přeložít ze zdrojáků, aby jel na raspi?
https://github.com/szieke/ScriptCommuni ... l-terminal
ScriptCommunicator serial terminal
-
- Příspěvky: 196
- Registrován: úte 13. srp 2019 8:07:32
- Dal poděkování: 1 poděkování
- Dostal poděkování: 12 poděkování
- PetrSmetana
- Příspěvky: 311
- Registrován: pon 22. črc 2019 9:06:45
- Bydliště: Mnich
- Dal poděkování: 28 poděkování
- Dostal poděkování: 60 poděkování
- Kontaktovat uživatele:
Re: ScriptCommunicator serial terminal
Kam si došel v tomto návodu pro kompilaci ze zdroje:
Building ScriptCommunicator:
- download ScriptCommunicator source
- install Qt (5.5 or higher) and QtCreator
- open ScriptCommunicator.pro and set the build directory
- set the build configuration to release and build
- open ScriptEditor.pro (can be found in ./ScriptEditor) and set the build directory
- set the build configuration to release and build
- open DeleteFolder.pro (can be found in ./DeleteFolder) and set the build directory
- set the build configuration to release and build
In addition to this following must be copied to the ScriptCommunicator executable:
- the ScriptEditor executable
- the DeleteFolder executable
- QtDesigner (can be found in ./designer)
- the Qt5DesignerComponents library (is customized for ScriptCommunicator, can be found in ./designer/'plattform name')
- manual
- template folder
- exampleScripts folder
- apiFiles folder (can be found in ./ScriptEditor)
- AardvarkI2cSpi library
- PCANBasic library (only on windows)
For an example look at a pre-build version of ScriptCommunicator.
Building ScriptCommunicator:
- download ScriptCommunicator source
- install Qt (5.5 or higher) and QtCreator
- open ScriptCommunicator.pro and set the build directory
- set the build configuration to release and build
- open ScriptEditor.pro (can be found in ./ScriptEditor) and set the build directory
- set the build configuration to release and build
- open DeleteFolder.pro (can be found in ./DeleteFolder) and set the build directory
- set the build configuration to release and build
In addition to this following must be copied to the ScriptCommunicator executable:
- the ScriptEditor executable
- the DeleteFolder executable
- QtDesigner (can be found in ./designer)
- the Qt5DesignerComponents library (is customized for ScriptCommunicator, can be found in ./designer/'plattform name')
- manual
- template folder
- exampleScripts folder
- apiFiles folder (can be found in ./ScriptEditor)
- AardvarkI2cSpi library
- PCANBasic library (only on windows)
For an example look at a pre-build version of ScriptCommunicator.
Modré z nebe na počkání, zázraky do dvou dnů.